Short throw wireless projection for comfortable presentations – PT-TW350
Designed for education and corporate applications
- Projects 80 inch screen from a distance of only 80cm
- Lamp and filter replacement cycle of up to 10,000 hours（Reduces TCO）
80-inch Screen Images with a Short Projection Distance Ranging from 0.75 m to 0.8 m*
Close range projection reduces not only shadows of the presenter but also glare of the projection light,
making lectures and meetings less stressful.
* Projection distance for 80-inch screen, • PT-TW351R/TW350: 0.80 m (2.62’) (16:10 aspect ratio)
A maximum 10.000 hour *1 lamp replacement cycle and 10.000 hour *2 air filter replacement cycle
The PT-TW350 has a maximum lamp replacement cycle of 10,000 hours.*1 The air filter also has a
replacement cycle of 10,000 hours.*2 This reduces maintenance hassles for long periods of use, and helps to lower
maintenance costs and reduce environmental impact.
*1 This is the maximum value when the lamp power is set to Eco2. The usage environment affects the lamp replacement cycle, *2 The usage environment affects the duration of the filter.
|Lamp Control||Replacment cycle of lamp and air filter|
Daylight View Lite
The Daylight View Lite function can be activated from the remote control for easy and comfortable viewing during presentations and lectures in a bright room.
Ease of installation
Corner keystone correction enables angled projection
All you need to do is designate for points as the corner of the projected image,
and this function easily carries out horizontal and vertical keystone correction.
Curved screen correction
Barrel and pincushion distortions are easily corrected when projecting
onto a curved screen.
Easy remote monitoring and control over a LAN
Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status.
In addition, Multi Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.
The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.
Easy lamp and air filter replacement simplifies maintenance
For easier maintenance, you can replace the lamp from the top and the air filter from the side, even after the projector is installed on the ceiling. This eliminates the need to detach the projector from its mounting bracket in ceiling-mounted applications.
Quiet 28-dB * design hepls to hold viewer’s attention
The noise level is as low as 28 dB*. This helps your audience to keep their attention on the discussion or on the screen images during quiet scenes.
* Lamp control: Eco2
Multiple useful features
Easy wireless projection by optional module
Simply inserting the optional ET-WML100 Wireless Module into the USB port on the projector enables easy wireless projection from Windows PCs, iOS devices, or Android devices on which the proper freeware is installed.
Presenter Light Ver.1.0 for Windows® PCs
• Pictures, videos, and any documents including PDF files/Power Point files, whatever are displayed on the PC screen can be projected.
• The images from up to four PCs can be projected simultaneously.
For more information about Presenter Light software or to download the software, please visit the software download page.
VueMagic™ Pro* for iOS/Android Devices
• Pictures, some documents including PDF files can be projected.
• Live camera mode / Annotate mode can be used.
• The images from up to four devices can be projected simultaneously.
* VueMagic™ Pro is a product of Pixelworks, Inc. For detailed information, refer to the following website.
Memory viewer function
In addition to JPEG/BMP image and text files, PDF files can be projected by simply inserting a USB memory device containing the data into the USB memory port. Now you can start your presentation without having to connect to a computer.
PT-TW351R / TW350 / TX410 / TW320
* Featured image: PT-TW351R
PT-TW350 / TX410 / TW320
Note: HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
|Power supply||AC 100-240 V, 3.5 A, 50 Hz/60 Hz|
|Power consumption||300 W (6 W with Standby mode set to Normal, 0.5 W with Standby mode set to Eco*1)|
|LCD panel||Display method||Transparent LCD panel (x 3, R/G/B)|
|Drive method||Active matrix method|
|Panel size||15.0 mm (0.59 inches) diagonal (16:10 aspect ratio)|
|Pixels||1,024,000 (1280 x 800)|
|Lens||Fixed zoom, Manual focus lens, F = 1.8, f = 6.08 mm, Throw Ratio: 0.46:1|
|Screen size||1.27-2.54 m (50-100 inches) diagonally, 16:10 aspect ratio|
|Resolution||1280 x 800 pixels*3|
|Brightness*2 (Lamp power: Normal)||3,300 lm|
|Lamp||Display method||230 W x 1 lamp|
|Lamp replacement cycle*4||Normal: 5,000 hours, Eco1: 6,000 hours, Eco2: 10,000 hours|
|Center-to-corner uniformity*2||80 %|
|Contrast*2||16,000:1 (all white/all black, Iris: On) (Image mode: Dynamic, Lamp control: Normal)|
|HDMI IN||525i (480i)*5, 625i (576i)*5, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/60p, 1125 (1080)/50p, 1125 (1080)/24p, 1125 (1080)/25p,
1125 (1080)/24sF, 1125 (1080)/30p, VGA size (640 dots x 480 dots)-WUXGA (1920 dots x 1200 dots), dot clock: 25-162 MHz
|RGB||fH: 15-91 kHz, fV: 24-85 Hz, dot clock: 162 MHz or lower|
fH: 15.73 kHz, fV 59.94 Hz [525i (480i)],
fH: 45.00 kHz, fV: 60 Hz [750 (720)/60p],
fH: 28.13 kHz, fV: 25 Hz [1125 (1080)/25p],
fH: 67.50 kHz, fV: 60 Hz [1125 (1080)/60p],
fH: 15.63 kHz, fV: 50 Hz [625i (576i)],
fH: 37.50 kHz, fV: 50 Hz [750 (720)/50p],
fH: 27.00 kHz, fV: 24 Hz [1125 (1080)/24p],
fH: 56.25 kHz, fV: 50 Hz [1125 (1080)/50p],
fH: 31.47 kHz, fV: 59.94 Hz [525p (480p)],
fH: 33.75 kHz, fV: 60 Hz [1125 (1080)/60i],
fH: 27.00 kHz, fV: 48 Hz [1125 (1080)/24sF],
fH: 31.25 kHz, fV: 50 Hz [625p (576p)],
fH: 28.13 kHz, fV: 50 Hz [1125 (1080)/50i],
fH: 33.75 kHz, fV: 30 Hz [1125 (1080)/30p],
|Video/S-Video||fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/SECAM/PAL-N]|
|Vertical||±15 ° (Auto, Manual)|
|Horizontal||±15 ° (Manual)|
|Terminals||HDMI IN||HDMI 19-pin x 1 HDCP compatible, Deep Color compatible, Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)|
|COMPUTER 1 IN||D-sub HD 15-pin (female) x 1 [RGB/S-Video/Y·PB(CB)·PR(CR)]|
|COMPUTER 2 IN||D-sub HD 15-pin (female) x 1 [RGB]|
|MONITOR OUT||D-sub HD 15-pin (female) x 1 [RGB/Monitor output]|
|VIDEO IN||Pin jack x 1|
|AUDIO IN 1||M3 (L,R) x 1|
|AUDIO IN 2||Pin jack x 2 (L,R)|
|AUDIO OUT||M3 (L,R) x 1 (variable)|
|LAN||RJ-45 (x 1) for network connections, 10Base-T/100Base-TX, PJLink™ (Class 1) compatible|
|SERIAL IN||D-Sub 9-pin (female) x 1 for external control (RS-232C compatible)|
|USB-Type A||Memory Viewer/Wireless Module (DC 5 V, max. 500 mA)|
|USB-Type B||USB Display|
|Built-in speaker||10 W (monaural)|
|Operation noise*2||Normal: 37 dB, Eco1: 33 dB, Eco2: 28 dB|
|Cabinet materials||Molded plastic (PC)|
|Dimensions (W x H x D)||335 mm x 134.1 mm*6 x 329 mm (13 3/16″ x 5 9/32*6 x 12 15/16″ )|
|Weight||Approx. 3.9 kg (8.6 lbs)|
|Operating environment||Operating temperature: 5-40 °C (41-104 °F) [Altitude: below 1,400 m (4,593 ft), High Land Mode: OFF]; 5-35 °C (41-95 °F) [Altitude: 1,400-2,700 m (4,593-8,858 ft),
High Land Mode: On1]; 5-30 °C (41-86 °F) [Altitude: 2,700-3,000 m (8,858-9,843 ft), High Land Mode: On2],
Operating humidity: 20-80 % (no condensation)
|Supplied accessories||Wireless remote control unit, Power cord (Number and size of cords depends on region), Instruction manual (Basic guide), Batteries for remote control (R03/LR03/AAA type x 2), RGB signal cable|
|Interactive Light Pen x 2, Batteries for pen (R03/LR03/AAA type x 4), USB cable (4.5 m), Software CD-ROM (Instruction manual, Multi Monitoring & Control Software, LightPen3)||Software CD-ROM (Instruction manual, Multi Monitoring & Control Software)|
- When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal.
- Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards.
- Input signals that exceed supported resolution will be converted.
- The value for the recommended lamp replacement cycle is the maximum value, at which luminance will become 50 %. Usage environment affects the lamp replacement cycle.
- Pixel-repetition signal (dot clock frequency 27.0 MHz) only.
- With legs at shortest position.