Ergotron 200 Series Dual Monitor Arm Two-Monitor Mount | P/N: 45-231-200

$687.00

  • Position two LCDs at the point of need, then push them back out of the way when not in use
  • Touch-screen stability
  • Cable management system routes and conceals cables under the arm
  • Accommodates various display sizes; slide screens into place to align edges
  • Rugged steel construction
  • Extends out 23″ (58 cm) or folds back to 5.7″ (14.5 cm) from wall in storage position
  • Rotate screens to view in either landscape or portrait mode
Availability: Available on backorder Categories: , ,
Brands:: Ergotron
Brands

Description

200 Series Dual Monitor Arm

Two-Monitor Mount

The interlocking design of the 200 Series provides telescoping adjustment. Easily extend or retract your monitors through a 23″ (58 cm) range of motion.

Part Number: 45-231-200

  • Position two LCDs at the point of need, then push them back out of the way when not in use
  • Touch-screen stability
  • Cable management system routes and conceals cables under the arm
  • Accommodates various display sizes; slide screens into place to align edges
  • Rugged steel construction
  • Extends out 23″ (58 cm) or folds back to 5.7″ (14.5 cm) from wall in storage position
  • Rotate screens to view in either landscape or portrait mode
  • Screen

    22

  • Capacity

    13 lbs
    5.9 kg *

  • Lift

  • Tilt

  • Pan

    360°

  • Rotation

    360°

  • Vesa

    MIS-D

  • Warranty

    5 years

  • Part Number: 45-231-200
  • Description: 200 Series Dual Monitor Wall Mount Arm (black)
  • Includes wall mount bracket, 2 extensions, crossbar and 2 sliding LCD mounts, VESA mounting screws
  • † Maximum outside width of display is 21.25″ (54 cm) when displays are 2″ (5 cm) thick. This is typically the horizontal dimension of a 22″-diagonal screen-size monitor. Actual allowable width of displays will vary slightly depending on display thickness
  • * Weight Capacity: 13 lbs (5.9 kg) per mount, 26 lbs (11.8 kg) total. Note: Monitors must be equal in weight or ±1 pound (.45 kg)
  • Monitor depth greater than 3″ (7.5 cm) may diminish capacity
  • Install display mounts on the bow at +2.5° or -2.5° angle to optimize viewing conditions
  • Monitors are installed with 8° inward off-set angle, creating a 16° viewing parabola for better sight lines
  • Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
  • Durable, easy-to-clean powder-coated painted steel exterior
  • Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud
  • Shipping Dimensions: 5.25″H x 13.75″W x 24.25″D (133 x 349 x 616 mm)
  • Shipping Weight: 11.8 lbs (5.3 kg)
  • Warranty: Five (5) years
Product Sheet pdf 267.25 KB English
Dimensional Illustrations pdf 100.81 KB
Installation Manual pdf 3.7 MB